QUOTE

A BODY SHOP
WITH AN EXPORT DESK

Liangshan is where China builds trailers. We are not a trading company renting an office in a port city — the plate is cut, the body is welded and the unit is load-tested here, then walked to Qingdao by our own team.

INSPECTIONSGS / BV
UPFIT LINE12,000 m²
UNITS DELIVERED3,200 +
COUNTRIES38
24 HPROFORMA AFTER SPEC LOCK
12,000 m²UPFIT & ASSEMBLY LINE
3,200 +UNITS DELIVERED
38DESTINATION COUNTRIES
01 / THE LINE

WE CUT THE PLATE, WE WELD THE BODY

Most exporters buy a finished truck from a big OEM and resell it. That works until a customer asks for a 26 m³ rock body, a 220 mm cylinder or a body that survives wet kaolin. At that point a trading desk has nothing to offer.

We run our own upfit line: plate cutting, body welding, cylinder mounting, painting and load testing. That is why a configuration change is a workshop instruction here, not a rejection email.

  • PLATENM400 / Q345 cutting, 6–16 mm, plasma + CNC
  • WELDBox-section ribs at 350 mm, full penetration
  • PAINTShot blast, epoxy primer, two top coats
  • TESTLoaded tipping test, brake test, leak test before dispatch
02 / THE DESK

THE PAPERWORK IS PART OF THE PRODUCT

A unit stuck at the port costs more per day than the discount you negotiated. Our export desk prepares CO / FTA, ECTN, SONCAP, PVoC and consular documents before the vessel sails, and books RO-RO, flat rack or bulk according to what the unit actually is.

You get one contact from configuration sheet to arrival notice — not a chain of forwarders forwarding each other.

  • PORTSQingdao, Lianyungang, Tianjin
  • METHODRO-RO, flat rack, bulk, container
  • DOCSB/L, CIQ, CO / FTA, insurance, ECTN, SONCAP, PVoC
  • TRACKINGBuild photos every 5 days, loading video on request
03 / CERTIFICATION

WHAT WE CAN PROVE

Inspection is arranged before loading, not after a complaint.

ISO 9001QUALITY SYSTEM
SGSTHIRD-PARTY INSPECTION
BVLOAD & SAFETY
CIQCHINA EXPORT
SONCAPNIGERIA
PVoCEAST AFRICA
04 / WHAT YOU CAN CHECK

NOTHING SHIPS
ON A PROMISE

Six checkpoints you can hold us to — each one produces a document, a photo or a number you keep, before the vessel sails.

  1. 01

    CONFIG SHEET

    BEFORE THE PI

    Every line signed: plate thickness, rib spacing, axle ratio, tyre pattern, paint spec. No “standard configuration” left open to interpretation.

  2. 02

    BUILD PHOTOS

    EVERY 5 DAYS

    Dated photos of your actual unit on the line, chassis number visible, sent to your WhatsApp or e-mail — not catalogue shots of a similar truck.

  3. 03

    LOAD TEST

    BEFORE PAINT

    Full-load tipping test, brake test and hydraulic leak test. The test sheet and video travel with your document set.

  4. 04

    THIRD-PARTY INSPECTION

    ON YOUR ACCOUNT

    SGS or BV booked in your name, invoiced at cost on a separate line. We do not mark it up, and we do not pick the inspector.

  5. 05

    DOCUMENT SET

    BEFORE SAILING

    B/L draft, CO / FTA, CIQ, ECTN, SONCAP, PVoC, packing list and insurance sent to you for checking first. Corrections are couriered at our cost.

  6. 06

    LOADING RECORD

    AT THE PORT

    Container, RO-RO or flat-rack photos with the seal number, matched against the B/L before departure. You see the unit leave.

COME AND SEE THE LINE, OR SEND US THE ROAD

TALK TO THE DESK →
中文简介 / CHINESE PROFILE

腾马国际 — 山东腾马国际贸易有限公司

公司位于山东省济宁市梁山县拳铺镇,自有专用车改装线,主营半挂车、自卸车、混凝土设备、工程机械与配件出口, 长期服务非洲、中东与墨西哥客户。半挂车、自卸车、油罐车、随车吊等车型可按客户工况定制,出厂前做装料试举、 制动与渗漏测试。中文询盘请发 enquiries@shandongheavymach.com,或直接联系总经理李若占。

PEOPLE

FOUR DIRECT LINES, NO SWITCHBOARD

Every enquiry goes to the partner who handles it. All e-mail on this site lands in one export-desk mailbox that the four of them read — or reach them directly on WhatsApp or WeChat. Write to enquiries@shandongheavymach.com.

QUOTE WHATSAPP PDF