- Tel+86 155 8978 8206
- WhatsApp+86 155 8978 8206
- WeChat133 7125 6899
Final say on price, contract terms, fleet programmes and large orders.
DUMP TRUCK 8×4 · 18 m³ · 40 T PAYLOAD
The base unit of our mining programme. 16 mm hardened body, front-mounted tipping cylinder and a cooling package that keeps pulling at 45 °C. Axle ratio, tyre and body volume are set against your haul road, not against a stock list.
Base configuration below. Everything printed here is what gets built — and everything here can be changed, as long as you tell us why.
| Drive configuration | 8×4 (steer 2, drive 2) |
|---|---|
| Wheelbase | 3,800 + 1,350 mm |
| Front axle | 9.5 t, forged I-beam |
| Rear axle | 2 × 16 t, ratio 5.73 (option 4.77 / 6.72) |
| Suspension | Leaf spring 10/12, reinforced |
| Steering | ZF 8098 hydraulic power |
| Brake system | Dual-circuit air brake, ABS optional |
| Tyres | 12.00R20 20PR mining pattern (6 + 1 spare) |
| Frame | Channel section 8 + 5 mm, riveted |
| Engine model | WP12.430E201 |
|---|---|
| Type | In-line 6, turbocharged & intercooled, mechanical pump |
| Displacement | 11.596 L |
| Rated power | 316 kW / 375 HP @ 1,900 rpm |
| Max torque | 2,060 N·m @ 1,000–1,400 rpm |
| Gearbox | HW19710, 10 forward + 2 reverse |
| Clutch | 430 mm single dry plate |
| Emission | Euro II (Euro III on request) |
| Air filter | Dual-stage cyclone + oil bath option |
| Body volume | 18 m³ (option 22 / 26 m³ rock body) |
|---|---|
| Floor plate | 8 mm NM400 hardened |
| Side / front plate | 6 mm / 8 mm |
| Rib spacing | 350 mm, box-section |
| Tipping cylinder | Front-mounted telescopic, 200 mm bore (220 mm heavy option) |
| Tailgate | Automatic latch, 2-point lock |
| Paint system | Shot blast + anti-corrosion primer + 2 top coats |
| Overall L × W × H | 9,850 × 2,550 × 3,450 mm |
|---|---|
| Curb weight | 15,800 kg |
| GVW | 31,000 kg |
| Design payload | 40,000 kg |
| Fuel tank | 400 L (option 600 + 400 L) |
| Turning radius | 9.4 m |
| Approach / departure angle | 28° / 32° |
| Cabin | HW76 long sleeper, steel, 2 seats |
|---|---|
| Air conditioning | Standard, tropical spec option |
| Instrument cluster | LCD + analog, fault code display |
| Battery | 2 × 12 V 180 Ah, 24 V system |
| Lighting | LED headlamp, rear work lamp, cab roof beacon option |
| Shipping method | RO-RO / bulk / flat rack (unit fully assembled) |
|---|---|
| Protection | Wax film + shrink wrap, wheels chocked, battery isolated |
| Spare parts | Fumigated wooden case, labelled by part number |
| Documents | B/L, commercial invoice, packing list, CO / FTA, CIQ, insurance, ECTN where required |
NM400 floor and box-section ribs. Built for rock, not for gravel.
20-ply 12.00R20 with cut-and-chip resistant compound.
Enlarged radiator, cyclone pre-cleaner, 55 °C ambient package.
Shorter stroke, lower stress on the frame, faster cycle.
Tick whatever matters on your site. We come back with the delta price and the new lead time per line — no guessing, no “standard only”.
Fast-moving items for the TM-D375. Shipped in the same container as the truck, or as a standalone order.
| PART NO. | DESCRIPTION | FITS | GRADE |
|---|---|---|---|
| TM-P-1101 | Oil filter, engine | WP12 / WP13 | GENUINE |
| TM-P-1102 | Fuel filter element | WP12 / WP13 | GENUINE |
| TM-P-1103 | Turbocharger assembly | WP12.430 | OEM EQ. |
| TM-P-1104 | Clutch disc 430 mm | HW19710 | OEM EQ. |
| PART NO. | DESCRIPTION | FITS | GRADE |
|---|---|---|---|
| TM-P-2101 | Tipping cylinder seal kit | 200 / 220 mm bore | GENUINE |
| TM-P-2102 | Gear pump, PTO driven | TM-D series | OEM EQ. |
| TM-P-2103 | Control valve block | TM-D series | OEM EQ. |
| PART NO. | DESCRIPTION | FITS | GRADE |
|---|---|---|---|
| TM-P-4101 | Brake lining set, front | 9.5 t axle | GENUINE |
| TM-P-4102 | Brake drum, rear | 16 t axle | OEM EQ. |
| TM-P-4103 | Leaf spring assembly | TM-D series | OEM EQ. |
Model code and your port is enough to start. Add the duty cycle and we will adjust the build.
Every enquiry goes to the partner who handles it. All e-mail on this site lands in one export-desk mailbox that the four of them read — or reach them directly on WhatsApp or WeChat. Write to enquiries@shandongheavymach.com.
Final say on price, contract terms, fleet programmes and large orders.
Quotations, configurations, drawings and proforma invoices. Start here for a price.
Contracts, payment terms, LC and commercial conditions. Agency and long-term supply.
Export documents, inspection, loading and port logistics. Spare parts and wear kits.